Buyer’s Guide to Chainsaws



Guide to Chainsaws Hello my name is Ron Weingartz. I would like to talk to you about what to look for when purchasing a chainsaw. There are many different sizes and variation to chainsaws, we going to start with electric powered saw. Electric powered saw will be an excellent choice if you just trimming around the house and with close access to electrical source. More conventionally we see is a gas power chain saw. Gas power chain saws are available in different sizes and engines and different chain length. The typical gas saw will start with the 14inch burn chain. This is a small engine which is also very light eight.

The light weight makes it easier to handle so if you have occasional use or maybe you occasionally have a tree to cut down. This is an excellent choice for the lighter type use. As you move up in the chains, and saws and you get some larger displaced engines which will handle your heavier cutting if you have the harder wood say an oak example or larger diameter tree, you have more power to handle that. And then there is also get the capability to add the larger sized bar. For typical home use 14, 16 or 18 inch bar depending on the application that you are using it for will be an excellent choice but bars are available up to 40 inch for a more professional type of use.

As you get into the large size of the larger displaced engine which handle a large bar but also will require a larger chain. Large chains will cut faster because you are taking a large bite of wood. And the large engine will have the extra power to handle the extra bar size and the large diameter chain. As you get into the large saw’s you also do pick-up little extra weight if you do heavier cutting you going to need that extra power but for light use you may not want that extra weight. Another important feature is the vibration on the saw. There is a good inner vibration system. The inner vibration system basically rubber mounts to the engine it helps to absorb the engine vibration so less vibration up into the handles.

It’s also very important typically when you using a saw you have your gloves on many times as in the fall or winter use. For your fuel reservoir and your burn chain resouvour with large diameter caps are very easy to remove with gloves. It makes it easier to fill those reservoirs. It’s also important safety feature that is definitely something that you want in any saw is a chain breaking system. Chain breaking system what that will do is if you should have a kick-back on burn chain, the break will engage to prevent, stopping the chain and hopefully preventing any injuries.

Also another thing you will see another time there will be comparable sized engines on different saws, but they will be lighter on weight, and have more hose power. Those are typically professional grade saws. Professional grade saws designed for longer usage. The lighter weight materials, and different engine technology to develop more power. So that is an excellent choice but you will pay a premium for those features. Also as I mentioned the chain is the part that is doing the work so sharp chain is very important. You may want to consider having a spare chain, so if you see double chain while you using, you could put a sharp chain to continue the project at hand. Chains can be sharpened either manually by yourself with a chain filing system or they be professionally done. The other thing is your chain safety is you want to make sure you have safety apparel. You want to make sure you have adequate ear protection, ear protection because the chains are usually very loud. This will help prevent ear damage. Also you have a lot of wood chips flying, when you using a saw you want to make sure you have proper eye protection to prevent any eye damage .

very proper way for protection is what they call a helmet system .helmet system has a hard hat so any falls ill protect the head , the eye shield that can be raised very easily put down when in use. And then has a built in ear protection as well. So this is an excellent choice to give you full protection. Another thing you may want to consider is a chap system, chaps have in the chaps so the chain should cross your leg, the chap will rap around the chain and help prevent any damage. I hope that helps in helping making a good decision for a chainsaw..

Husqvarna Power Equipment


Now it’s time for limbing work calmly and methodically as it’s easy to get kickbacks try to place the trunk so that you can work between waist and knee height stand to the left to the trunk and work from the base of the tree upwards stand firmly with your feet apart and keep the saw close to your body work with both the pulling and pushing chain and always try to rest his saw on the trunk or against your hip take care not to contact branches with the upper part of the bar nose only move when you have the trunk between yourself and the bar of the saw branches on the upper side at the trunk can be cut with the saw lying on its side you can limb the branches on the underside of the truck at the same time as the rest if you have a good working height if the tree has large branches they can be under great tension in which case you should limb then from the outside and in towards the truck saw with the bar held vertically to reduce the risk of getting caught if the branch is very large you might have to cut it from two sides observe how the branches attention so that you can solve them from the correct side otherwise there is a risk the saw will get caught if the tree is lying right on the ground you’ll have to wait the branches on the bottom until you’re finished with the others and roll the trunk over be careful when the trunk is close to the ground since it’s quite a risk that you touch something with the tip of the bar which will cause a kickback now you got cross-cutting left study the tree before you start especially if the trunk is thick first try to see how it’s tensioned watch how the trunk reacts when you start to saw you might have misjudged the tension stand off to the side of the cut since the trunk can jump up when it comes apart never stand below the truck at the ground a sloping if the trunk lies so that the pressure comes from above start with the cut from above saw about one third of the way through the trunk or until it starts to pinch the bar then cut from underneath to meet the first cut if instead the trunk lies so that the pressure comes from below you work the other way around start by sawing from underneath about one third of the way through the trunk or until it starts to pinch the bar then cut from above to meet the first cut if the bar gets stuck don’t try to pull out the saw instead stop the engine bend open the trunk until the thaw comes loose when you finished work it’s a good idea to take a look at your saw to make sure its functioning properly is safe and ready to go the next time you need it of course maintenance requirements depend on how much you use the saw

Home Remedies For Wrinkles
Count Stats Visits