Hey guys, so this is the Orec Gardenquake tiller. It’s a rear-tine rototiller. It’s the excellent tiller for dwelling gardeners, organic gardeners, organic farmers. So got a couple of peculiarities to go over. This is your gear-shift lever, so what this does is it changes your paraphernaliums. You have one reverse rate in shipping. The committee is first gear in transport and this is second gear in shipping. If you want to till you can go ahead and invoke your gear-shift lever, is moving forward over this room and that will start the tines to till. You can also use your control, and with your control, you can invoke or lower it, and that will help to adjust your device influence as well. You have our differential lock or diff lock for short. This is your diff lock lever, this fastens in the wheel axel. So if I employ it this room, that fastens the axel, and that gets the machine running straight forwards. Commonly you use this when you’re tilling. It will help you till in a straight line. When you’re done tilling, you require more maneuverability, you want to go ahead and detach your diff lock lever and this will shape, this will open the axel and this will allow you to turn the machine more easily.
So, if you want to adjust the extent, use this lever right here. What you do is you pull this in, towards the handle table, and you can invoke or lower the extent to suit your needs. This is your drive so any time you want to get the machine running, mostly what you do is you lower this, and that will drive the machine. So if you need to stop it right off, you can just let go and that will stop the machine. The device will keep going but the machine will, the machine will be suspended. This here is your device kill swap. So this is basically like an on-off swap. So like when I want to start the machine, I transform that on, I draw the engine, that they are able to start, that they are able to get the engine running. This lever here is going to allow you to adjust your handle table. What you can do is you can make this, that will loosen this up and then you can invoke or lower the handle table to better suit your healths, the high levels of the operator.
It’s also great if you want to transport the machine because then you can lower the handle table here and you can tie-up it down, you can decline the size of the machine, shape it easier to move that room ..